Page 1 of 1 1
Topic Options
#2004647 - 12/27/11 08:46 AM Need some info on scanning
kace
Just got here


Registered: 04/16/07
Posts: 5

Offline
I wish to add some scanned images to my registry set. I was wondering what settings are best. Such as best DPI setting & what format to save to (TIFF, JPEG, PDF etc.). My scans don't look as sharp as some I have seen on the registry. I'm not sure what I am doing wrong. BTW I have a Cannon MG5220 scanner. Thanks for the help.

Kevin

Top
#2004648 - 12/27/11 09:01 AM Re: Need some info on scanning [Re: kace]
Blackie
Carpal Tunnel


Registered: 12/23/08
Posts: 4766
Loc: Southern US

Offline
Kevin I use JPEG and they work great.
_________________________
Working on the following sets:
1966 Topps Football
1964-65 Topps Hockey
Upgrades to 65Topps Football

Top
#2004651 - 12/27/11 10:28 AM Re: Need some info on scanning [Re: Blackie]
SMtJoy
veteran


Registered: 01/23/08
Posts: 1503

content Online
Hi Kevin,

On DPI I use 300 but they look about the same at 150. I think a monitor only can show up to 75dpi, above that it will only help print outs and such. I also save as a Jpeg.

On clarity- I do know type of scanner makes a big difference and the all-in-ones usually are not as sharp as the scanner only. I know it has something to do with how they scan items but I dont know the technicial reason. Maybe someone else can chime in.

Top
#2004652 - 12/27/11 11:40 AM Re: Need some info on scanning [Re: SMtJoy]
Irwin Fletcher
addict


Registered: 11/11/09
Posts: 499
Loc: New Jersey

Offline
I just bought a new scanner because my previous one (part of an all-in-one) never produced clear scans of SGC slabbed cards. Because of the depth of the slab, you will need a scanner with CCD technology (as opposed to CIS) in order to get a clear scan. Fortunately, CCD scanners can be found relatively cheaply. I went with the Epson V30, which I bought last week for $60 at Office Depot. It does an incredible job scanning SGC slabbed cards.

I scan at 1200 dpi and save the image as 1024 x 768 resolution JPG for use on the SGC Registry. Now I just need to re-scan all of my cards!

Top
#2004654 - 12/27/11 12:35 PM Re: Need some info on scanning [Re: Irwin Fletcher]
kace
Just got here


Registered: 04/16/07
Posts: 5

Offline
Thanks for all the info. It was very helpful.

Kevin

Top
#2004902 - 01/07/12 02:36 AM Re: Need some info on scanning [Re: kace]
BigRedOne
old hand


Registered: 01/21/08
Posts: 1046

Offline
Welcome aboard Kevin!

I too just recently bought the Epson V30 and it is a fantastic scanner for cards and does great with SGC slabs.

While JPG is the correct file format, Scanning at 1200 dpi could take a long time and saving the scan at 1024 x 768 is quite a large size.

Im not sure scans that large are the way to go. It may make looking at your registry set very time consuming waiting for the pics to load.

Also Pics that size are way to big in my opinion to work on the message boards.

Maybe Irwin Fletcher will chime back in with addition info.

Here is what I find works best:

I scan at 48 bit color using 300-350 dpi

After cropping. I resize and save the scan at 400 pixels.

I am very satisfied with these results for using on message boards, ebay, etc.. The SGC set Registry may require a certain size to work best. I have not messed with my registry set in some time, but I do remember it taking an awful long time for the photos to load, so making them to big might cause slow load time when viewing your SGC registry set.

Again maybe Irwin Fletcher will chime back in with more info.

In the mean time I hope you enjoy the scans!






The Epson V30 also does great with Raw cards!






John


Edited by BigRedOne (01/07/12 02:37 AM)
_________________________

Top
Page 1 of 1 1


Moderator:  EARLSWORLD 
Hop to:
Who's Online
0 registered and 6 anonymous users online.
Newest Members
defghi104200, jklmno253672, hijklm176309, defghi521014, klmnop450123
1967 Registered Users

Generated in 0.016 seconds in which 0.001 seconds were spent on a total of 14 queries. Zlib compression disabled.